
15
7) After 30 minutes, move the Control Switch to the “OFF” position.
8) Same as step 4.
9) Move the Control Switch to the “ICE” position to fill the Water Tank with water.
10) After 3 minutes, move the Control Switch to the “SERVICE” position and the Service
Switch to the “WASH” position.
11) After 5 minutes, move the Control Switch to the “OFF” position.
12) Same as step 4.
13) Repeat steps 9 through 12 three more times
to rinse thoroughly.
14) Disconnect the Overflow Pipe. Next,
remove the Water Tank by removing the two
Thumbscrews and pulling the tank towards
you slightly and pushing it down. Be careful
to avoid breakage when handling the parts.
See Fig. 7.
Fig. 7
Bracket (L) Evaporator Cube Guide Water Tank Bracket (R)
Thumbscrew
Comentarios a estos manuales