Hoshizaki B-1300SS Manual de usuario

1Hoshizaki “A Superior Degree of Reliability” www.hoshizaki.com Model B-1150SS B-1300SS B-1500SS B-1650SS Ice Bin Hoshizaki America, Inc. Issued: 2

10Single Icemaker UnitDual Icemaker Units2. Installing the Icemaker1) Unpack the icemaker, and remove all shipping cartons, tape(s) and packaging.2)R

11Fig. 3D. Drain Connections See Fig. 3•Adrainoutlet,1"femalethread,islocatedonthebottomoftheicebin.•Thedrainmusthavea1/4

12E. Final Check List1) Is the icemaker/ice bin level?2) Is the icemaker/ice bin in a site where the ambient temperature is within +45°F to +100°F all

13III. Operating Instructions See Fig. 4A. BaffleThe baffle prevents ice in the bin from flowing out onto the floor while the bin door is open. 1. Remova

14C. Probe (Optional Accessory)The probe is used to break apart ice when it has bridged inside the bin and will not flow into the snout. To break apart

15IV. Cleaning and Maintenance InstructionsIMPORTANTEnsure all components, fasteners and thumbscrews are securely in place after any maintenance or cl

162. Sanitizing Procedure - Following Cleaning Procedure1) Wash all parts cleaned in the cleaning procedure using the following sanitizing solution: 1

17HOSHIZAKI AMERICA, INC.618 Hwy. 74 S., Peachtree City, GA 30269 USA TEL (770) 487-2331 FAX (770) 487-3360 www.hoshizaki.com 91A4LA10D

2FOREWORDIMPORTANTOnly qualified service technicians should attempt to install, service or maintain this ice bin. No such installation, service or main

3•Pleasereviewthismanual.Itshouldbereadcarefullybeforetheicebinisinstalledand used. Only qualified service technicians should install,

4I. SpecificationsA. Dimensions1. B-1150SSunits: mm [in.]

52. B-1300SSunits: mm [in.]

63. B-1500SSunits: mm [in.]

74. B-1650SSunits: mm [in.]

8II. Installation InstructionsA. Checks Before InstallationIMPORTANT1. This ice bin is designed and intended to be used in combination with a Hoshizak

9C. SetupCAUTIONIt is especially important that the ice bin is leveled in both left-to-right and front-to-rear directions. If it is not level, the res